Question: How Do I Pair My Avantree?

How do I pair my Avantree ck11?

Set CK11 to PAIRING MODE – press and hold the for 3 seconds until the LED flashes BLUE and RED alternately.


Double click the mute button – you will hear 2 beeps indicating a successful reset.

Then it will auto matically enter pairing mode..

How do you charge Avantree headphones?

Insert the micro USB (smaller) end into the charging port on the headphones and the USB end into a power source. You can either use the included charging cord or any USB to micro USB cable to charge. The LED on the headphones will light up as SOLID RED when charging and automatically turn off when charging is complete.

How do I connect my wireless headphones to my computer without Bluetooth?

If your computer does not have Bluetooth hardware, you can plug it into the USB port of your computer to get it. The Bluetooth adapter is an adapter that is connected via USB. Once installed and activated, the dongle will enable you to connect any Bluetooth device to your computer.

How do I connect my Bluetooth dongle to my computer?

Plug the Bluetooth dongle in any USB port on your laptop….How to connect Bluetooth accessories to computersTurn off any Bluetooth devices previously paired with your headphones.Power on your Bluetooth device.Click on the Bluetooth icon on your PC.Choose “Add a Device” and follow the instructions and prompts from there.

How do I pair my Avantree Bluetooth transmitter?

1) Pair with the first device by following the previous instructions in the “Use as a Transmitter (TX mode)” section. 2) Pair with the second device • Set second headphones/speaker to pairing mode. Set Oasis to pairing mode again, press the button for 3s until the TX LED flashes GREEN and WHITE. Wait until connected.

How do I reset Avantree Bluetooth transmitter?

Long hold A and B on the transmitter until both turn solid PINK. Then unplug the USB power cable from the transmitter, do not just turn it off, you need to unplug the cord. Ten seconds later, plug the cable back into the transmitter and turn the transmitter on.

How do I connect my Avantree Bluetooth headphones to my laptop?

Step 2: Turn on the Transmitter AND the Headphones. Turn the transmitter on by flipping the power switch to ON. Turn the headphones on by pressing & holding the MFB button (middle button) until you hear “Welcome to Avantree” from the headphones. The two devices should auto-connect right away.

How do I reset my Avantree headphones?

Press and hold the volume + and – buttons simultaneously for about 10 seconds until the LED briefly lights up RED & BLUE at the same time (may look PURPLE), indicating that the headphones have reset.

Is Avantree a good brand?

I did my research on the best Bluetooth headphones that would last a long time with battery life and have good sound plus be very comfortable for a fair price. I found the the Avantree headphones. … It is very easy to switch from device to device the range is not bad but no Bluetooth headphones have good range yet.

How do I connect my headphones to my android?

How to pair Bluetooth headphones with your phoneOpen the Settings app on your phone.Tap Connected devices.Tap Pair new device.Make sure your headphones are in pairing mode (see the owner manual on how to do this).Tap the headphones under the list of available devices.More items…•