How Do I Reset My 5g Rain Router?

How do I configure my router after resetting?

How to Reset Router From Configuration PageType your router’s IP address into any web browser’s search field.

Enter your username and password when prompted.

Go to System or System Tools.

Look for Restore or Factory Default.Click Restore or Reset and OK to confirm.Wait for the router to reboot..

Where is reset button on router?

The reset button is almost always on the back or underside of a router. The most universal way to reset a router, however, is via the reset button, usually found on the router’s back or underside. This button is almost always recessed but you should be able to access it with a straightened-out paper clip.

How long does rain 5g take to activate?

welcome to rain You can activate in under 15 minutes. The only thing that may hold up the RICA process is a problem with verifying a document – in that case, it’ll be done by one of our operators during office hours.

Why is my rain SIM not working?

Go to settings, Mobile data, Mobile Data network. Under Mobile Data set the APN to “rain” Under LTE setup set the APN to “rain” (on the later versions of iOS) … Select Voice and Data and make sure the option that has LTE/4G is selected.

Does Resetting router clear history?

They cannot log actual browsing history as they simply do not have the storage to do that. Some other answers recommend resetting the router to the factory state. … In some routers, including mine, resetting the router to the factory defaults does NOT clear the router’s log files.

Does resetting your router change your IP?

The common nature of DHCP is to “remember” the device and assign you the same IP address you had before, so simply turning off your router and turning it back on will not likely change IP address. However, if you try multiple times you may get lucky and will obtain a new IP address from your ISP.

Why do routers need to be reset?

If you own a WiFi router, you know the drill. When the internet goes down at home, you unplug the device, wait an excruciating minute, and plug it back in. … And, when your router doesn’t catch on to that change, the network connection gets out of sync. That’s when a quick reboot of your router can set things straight.

Can’t connect to WIFI After resetting router?

Resetting your router can fix a myriad of issues and an inability to connect is one of them. Press the reset button on the back of the router with a paperclip for 30 seconds and the router should default to factory settings. Use our guide to setting up a wireless router to get everything properly configured.

How do I reset my 5g router?

5G Home Router – Restore Settings to Factory DefaultsFrom the back of the router, locate the Reset button hole.Insert a paper clip then press and hold the Reset button for at least 10 seconds with the router powered on. If a backup was done prior to the reset, perform a restore if desired.

What happens if I factory reset my router?

A factory reset, on the other hand, wipes all your data from the router. This includes any passwords, Wi-Fi network details (like your network name (SSID) and passphrase), and any other settings you’ve changed. Essentially, it’s like you just purchased the router from the factory, hence the name. And that’s the point.

Which network does rain use?

The company behind the Rain network evolved from WBS (the same company that owned and ran the ancient iBurst network in the past) into the data network we have today. Due to some historical circumstances, the company has access to very good radio frequencies that are ideal for operating a 4G/LTE network.

How reliable is rain Network?

Rain has been sliding down the South African ISP rankings and is now rated as one of the worst Internet service providers in the country. … Whenever an article about Rain is published, complaints about poor network speeds, especially during peak hours, follow.

Does Resetting router change WiFi password?

If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.

Should you reset your router?

“In general, it’s a great idea to reboot the main Internet router every couple of months. … It’s also a good security practice to reboot the router every once in a while.” The benefits of regularly rebooting your router are twofold. If you want a faster connection, you should be regularly turning your router on and off.

How do I log into my rain router?

Opening a browser (Chrome, Firefox, Opera, Safari) navigate to 192.168. 8.1 and when prompted enter the default router username and password. (Refer to the documentation included with your router for these details. In most cases this will be ‘admin’ and ‘admin’).

How do I change the APN on my router?

How to configure APN settings for 4G LTE ModemsLaunch a web browser from a device that is connected to the modem. … In the Sign In field, enter the modem password and click the Sign In button. … Select Settings > Mobile > APN.To add a custom APN profile, click the Add button.Enter the settings for the new APN profile and click the Save button.